Bentley Manual 15 mm Silver Nickel Wheel Head & Lockshield Valve Set
This Bentley manual silver nickel valve set is an opulent high grade twin pack from Evolve consisting of two traditional radiator valves in a silver nickel finish: a wheel head and lockshield valve. Available with 15mm compression to fit all cast iron radiators, the dial is manually adjusted via the wooden lever supplied.
- Max. working pressure: 10 bar
- Max. pressure differential: 1 bar
- Min. water temperature: 2C
- Max. water temperature: 100C
- Max. ambient temperature: 50C
Please note: Bentley TRVs are only suitable for use as a reverse flow valve when the system differential pressure across the valve does not exceed 0.25 bar. An auto bypass should be fitted in conjunction with all Bentley valves.
| Manufacturer : | BiWorld |
|---|---|
| Manufacturer Product Number : | EV-BM15SN |
| GTIN : | 6938689700260 |
| Product Type : | Manual Valve Pack |
| Model : | Angled Valve |
| Weight (KG) : | 0.000000 |
| Manufacturers Warranty : | 1 Year (Subject to Manufacturers T&C's) |
| Installation PDF File : | download installation file |
Black Nickel is the most popular colour of valves but the Silver Nickel is a close second.
To some extent, yes. Painted radiators do give out a little less heat compared to standard white radiators but the difference is minor. It will not impact the radiators ability to produce heat and heat a whole room. However, all of our colours are done by using a powder coating and so the colour makes no difference to the heat output. If you are considering painting a rad yourself, please not the more layers of heat resistant paint you add, the great the impact on performance.
We have created package deals on all the most popular Designer radiators and valves in Columnrads UK. This covers all Column radiator and Flat panel radiator sizes, with vales that best suit these radiators.
All of our valves are Bi-directional.
However, it is useful for you to know that due to the unique flow diverter, built within all Revive column radiators the flow MUST to be on the same side as the permanent blank which is the opposite side to the air vent bleed valve.
This is more a flow and return system thing, but is useful to know when thinking about your valves.
