1200H x 398W 2 Column Vertical Hammered Gold Radiator

£159.17 Excl. Tax £191.00 Incl. Tax Best Buy

Not yet rated

There are no reviews yet.

Availability: In stock

You are ordering a special order item.

  • This item will take approximately 15 working days to be powder coated, we will then arrange delivery to you.
  • These items cannot be accepted for return if you are not sure about the colour.
  • They will be coloured specially for you and will be bespoke.
  • Please see our returns section for more information

The Revive 1200H x 398W two column vertical wall mounted radiator in hammered gold creates a modern or traditional ambiance to any setting. Easy to install, maintain and clean, it offers a fast, efficient heat-up time.

Custom coloured column radiators take 15 working days to be coloured and then we will contact you to arrange delivery.

  • Wall mountable only
  • High quality paint finish
  • Complete with wall fixings and air vents
  • Outputs certified to EN442
  • 5 year manufacturers warranty

Please note: Decorative column radiator feet are an optional extra. Radiators require a secure fixing to the wall and the feet are only for decorative purpose. Revive column radiators are NOT freestanding when used with feet.

Also due to the unique flow diverter built within all Revive column radiators the flow MUST to be on the same side as the permanent blank which is the opposite side to the air vent bleed valve.

Coloured column radiators are deemed to be special order as they are made to order and therefore cannot be cancelled / returned once ordered.




Weight
15.0kg
Manufacturer
Revive Radiators
Manufacturer Product Number
U2120-8-0590
Manufacturers Website:
EAN
7630015267551
Warranty
5 Year
Warranty Terms and Conditions
Height (Metric)
1200mm
Width (Metric)
398mm
Depth (Metric)
62mm
Material
Steel
Radiator BTU Output
2257
Heat Output Watts
662
Column Rad Sections
8
Number of Columns
Two
Colour Process
Powder Coated
Connections
1/2" Female Thread
Projection from wall
85mm - 90mm
Pipe Centres
54mm - 59mm from the wall
Bracket Quantity
Set of 4 Wall Brackets Included
Maximum Working Pressure
10 Bar
Manufacturers brochure PDF File
Installation PDF File
Special Order Colour
Hammered Gold
Product Type
Column Radiator
Radiator Orientation
Vertical
Product Questions
I am going to fit one of your column rads and would like to know the measurements

Measurements for mounting radiators can be found in the installation PDF under the specification tab on each radiator product page.

The measurements can also be found on the Revive radiator website or download the PDf in the attachement to this answer.

You will also need to consider that the foot is 100mm from the finished floor level.

Top tip, if building the stud wall for this radiator to be fixed to, use Ply or OSB board between the studs even if it is stuck using gripfil to the back of the pasterboard as this gives you a much larger target for your fixings accross the area the radiator will be hung and give you more margin for error.

Was this answer helpful?
Yes | No
How can I work out which size radiators I need?

Our BTU Calculator tool will help you identify suitable radiators for the specific room(s) in question. As a guide, in our experience we’ve found the typical room size of the average 3 bedroomed house requires the following radiator sizes:

Lounge = 1400 x 600 double
Dining room = 1200 x 600 double
Kitchen = 900 x 600 double
Bedroom 1 = 1400 x 600 single
Bedroom 2 = 1200 x 600 single
Bedroom 3 = 900 x 600 single
Bathroom = 600 x 600 double

Was this answer helpful?
Yes | No
Can't find an answer? Search all FAQ’s here